Does the combination of whitening toothpaste and hydrogen peroxide bleaching increase the surface roughness and change the morphology of a nanofilled composite?

Aim: To evaluate changes in the surface roughness and morphology of a nanofilled composite following toothbrushing with a whitening (WT) or regular toothpaste (RT), alone or combined with 35% hydrogen peroxide bleaching (HP). Methods: Seventy disc-shaped nanofilled composite (Filtek Z350XT) specimens were randomly divided into groups (n=10): WT, RT, TB (without toothpaste ­ control) or the combinations WT/ HP, RT/HP, TB/HP and HP. All groups underwent toothbrushing simulation (60,000 cycles) and bleaching treatment (4 sessions). Mean surface roughness (Ra, µm) was measured before (T0) and after treatments (TB). Surface morphology was assessed by scanning electron microscopy (SEM) at TB. Mean Ra was analyzed using general mixed models and multiple comparisons by the Tukey-Kramer test (α=5%). Results: HP caused no surface roughness changes on the nanofilled composite after treatment (p>0.05). RT toothbrushing, combined or not with HP, increased the surface roughness (p<0.05). WT and WT/ HP protocols had no effect on the surface roughness of the composite (p>0.05). The nanofilled composite submitted to RT toothbrushing combined with HP (RT/HP) presented substantial surface alterations under SEM, showing deep depressions and round-shaped defects. Toothbrushing with RT combined with the bleaching agent increased exposure of the inorganic fillers. Conclusion: WT toothbrushing, regardless of HP combination, or the single HP protocol had no effect on the surface roughness of the nanofilled composite. However, RT combined with HP negatively affected surface roughness and presented the most noticeable surface changes among groups

Effects of black tea tooth staining previously to 35% hydrogen peroxide bleaching

Aim: To determine if the artificial staining with black tea (BT) influences the enamel microhardness before in-office bleaching and if BT staining is necessary to evaluate the efficacy of bleaching with 35% hydrogen peroxide Methods: Enamel/dentin blocks were randomized into groups according to the staining protocol (n=5/group): (CO) control ­ maintained in artificial saliva solution (AS); (BT4) immersed in black tea solution for 4 h; (BT24) immersed in black tea solution for 24 h. After the staining protocols, all specimens were kept in AS for one week, followed by bleaching (three sessions of HP application for 40 min). Knoop surface microhardness (kgF/mm2) was determined at baseline (T0), after staining (T1), after 7 days of storage in AS (T2), and after bleaching (T3). The color (∆E00) and coordinate changes (∆L, ∆a, ∆b) were measured using a digital spectrophotometer at T0 and T3. Data were submitted to one-way (∆E00, ∆L, ∆a, ∆b) or two-way ANOVA repeated measures (kgF/mm2) and Tukey's test (a=5%). Results: The staining protocols (BT4 and BT24) promoted significantly lower microhardness (T1 and T2, p<0.05) than CO, whereas CO was the only group to maintain microhardness values over time. Bleaching promoted perceptible ∆E00 without a significant difference among the groups regardless of the staining protocol (p=0.122). CO and BT4 showed no differences in terms of ∆L and ∆a (p>0.05), but BT4 displayed a higher ∆b than CO. Conclusion:The artificial staining with BT negatively affected the enamel surface microhardness and was not essential to evaluate the efficacy of 35% hydrogen peroxide bleaching

Effect of whitening toothpastes and activated charcoal powder on enamel wear and surface roughness

Abstract This study aimed to evaluate surface roughness (Sa), roughness profile (Rv), and enamel wear after brushing with different whitening toothpastes and charcoal powders. Sixty (n = 10) bovine enamel blocks (6 × 6 × 3 mm) were randomly distributed into six groups according to toothpaste type: regular toothpaste (CONT), toothpaste containing 2% hydrogen peroxide (HP), toothpaste containing titanium dioxide (TiO2), toothpaste containing charcoal (COAL), toothpaste containing charcoal and TiO2 (COAL+TiO2), and activated charcoal powder (COAL_PWD). Each block was subjected to 30,000 reciprocal cycles at a 1:3 proportion slurry. After brushing, the blocks were analyzed using an optical profilometer to determine Sa, Rv, and enamel wear. In addition, representative 3D images of each group and wear profiles were obtained. Sa was analyzed using generalized linear models followed by Bonferroni correction, whereas Rv was analyzed using one-way analysis of variance. After brushing, COAL and COAL+TiO2 showed higher Sa values than COAL_PWD. However, no significant difference was observed in Sa between whitening toothpaste and COAL_PWD, and CONT (p > 0.05). In addition, no differences were observed among the groups in Rv (p > 0.05). Conversely, enamel wear was higher for TiO2, COAL, COAL+TiO2, and COAL_PWD than for CONT. CONT showed the least enamel wear, whereas HP showed intermediate values. Representative 3D images and line profiles showed lower step-height and lower mean surface losses for the CONT and HP groups than for the other groups. Whitening toothpastes and COAL_PWD did not increase Sa or Rv compared with CONT, while CONT demonstrated lower enamel wear.

Bond strength of resin composite to enamel submitted to at-home desensitizer and bleaching agents

Aim: This study evaluated the effect of a desensitizer agent (DES) during bleaching with 10% carbamide peroxide (CP) on enamel microshear bond strength (µSBS). Methods: Sixty bovine incisors were obtained and randomly distributed into groups (n=15): (C) Control: no desensitizing or bleaching, (DES) desensitizing gel application, (CP) bleaching with 10% CP and (CP/DES) bleaching with 10% CP combined with DES. Bleaching was performed for 6 h/day for 14 consecutive days. DES was applied for 8 h only on the 7th and 14th days of therapy. Specimens were stored in artificial saliva among the CP or DES applications and submitted to µSBS testing at three postrestoration times (n=5): 24 h, 7 days, and 14 days after bleaching using a universal testing machine. Failure modes were observed under a stereomicroscope. Data were analyzed by two-way ANOVA and Tukey's test (α=5%). Results: Immediately after bleaching (24 h), CP promoted lower µSBS than the C and DES groups (p<0.05) but with no differences from the CP/DES. µSBS increased in the DES, CP, and CP/DES groups (p<0.05) when bonding was performed for 7 or 14 days elapsed from bleaching. CP/DES exhibited the highest µSBS among the groups 14 days after bleaching (p<0.05). Cohesive failure in enamel was predominant in the CP groups, while adhesive failure was mostly observed for the other groups. Conclusion: The use of a desensitizer during at-home bleaching maintained the enamel immediate bond strength, and its application favored bonding when the restoration was delayed for 14 days

Combination of at-home and in-office bleaching techniques: case series / Combinação das técnicas de clareamento dental caseira e de consultório: relato de casos

ABSTRACT Tooth bleaching is one of the most conservative aesthetic techniques. At-home and in-office bleaching may be performed, as well as the combination of both techniques. As this combination may be done in different manners, distinct orders of combinations were proposed in this report. A 24 years-old man, whose upper central incisor and canine shades were A2 and A3 respectively, was initially treated by chair-side with 40-min application of 40% hydrogen peroxide (HP) for two sessions. Afterwards, an two-week overnight at-home bleaching was performed with 10% carbamide peroxide (CP). The shade of upper central incisors changed to 1M1 and canine was B1. Conversely, a 30 years-old woman was firstly conducted with at-home bleaching (overnight 4-weeks 10% CP) and, subsequently, with a single appointment of in-office bleaching for 45 minutes (35% HP). The shade of her upper central incisor changed from A1 to 0.5M1 and the upper canine from A3 to B1. The VITA classical (A1-D4) shade guide and VITA Bleached guide 3D-MASTER were used to determine the tooth color during the treatments. In both bleaching treatments, patients reported no significant tooth sensitivity and the final outcomes met their expectation.

RESUMO O clareamento dental é uma das técnicas estéticas mais conservadoras no âmbito odontológico. Técnicas de clareamento caseira ou de consultório, ou a combinação de ambas, podem ser realizadas para alcançar o prognóstico desejado. Esta combinação das técnicas pode ser realizada por meio de diferentes abordagens, como apresentado neste relato de casos. Um paciente do gênero masculino, 24 anos de idade, cujos incisivo central superior e caninos apresentaram cor A2 e A3, respectivamente, foi inicialmente submetido à técnica de clareamento de consultório de duração por sessão de 40 mim com gel de peróxido de hidrogênio (PH) 40%, em duas sessões. Posteriormente, a técnica de clareamento caseira foi realizada durante duas semanas com gel de peróxido de carbamida (PC) a uma concentração de 10%.A cor final dos incisivos centrais superiores foi alterada para 1M1, enquanto a dos caninos para B1. Por outro lado, uma paciente do gênero feminino, 30 anos de idade, foi inicialmente submetida ao clareamento caseiro (durante a noite, por 4 semanas- PC 10%), e subsequentemente, com aplicação pontual de agente clareador (PH 35%) em consultório, em sessão de 45 min. A cor do incisivo central superior da paciente, mudou de A1 para 0,5M1 e do canino superior de A3 para B1. As escalas de cor VITA Classic (A1-D4), e VITA Bleachedguided 3D-MASTER foram utilizadas nesta série de casos para determinar a coloração dos dentes durante os tratamentos. Em ambos os tratamentos, os pacientes não reportaram sensibilidade dental significante, e suas expectativas finais foram atendidas.

Three-year follow-up of flowable bulk-fill resin restorations in posterior teeth: a double-blind randomized controlled clinical trial / Acompanhamento de três anos de restaurações do tipo bulk-fill flow em dentes posteriores: ensaio clínico controlado randomizado duplo-cego

Objetivo: Este ensaio clínico randomizado avaliou o comportamento de restaurações com resina composta bulk-fill flow em dentes posteriores após três anos do tratamento restaurador. Métodos: Dezessete pacientes (12 mulheres, 5 homens, idade 23-59) foram selecionados para ter pelo menos duas restaurações de amálgama ou de resina composta substituídas, ou receber tratamento restaurador para lesão cariosa. As cavidades foram aleatoriamente alocadas para receberem o compósito bulk-fill flow Suferil SDR Flow, oclusamente coberto por uma resina composta convencional nano-híbrida Esthet-X HD (técnica bulk and body), ou serem preenchidas exclusivamente com Esthet-X HD, inseridas em incrementos de 2mm cada técnica incremental). Um adesivo convencional de dois passos foi aplicado em todas as cavidades. Trinta e quatro restaurações Classes I ou II foram realizados em dentes posteriores (n=17) no início do estudo (baseline). Após 03 anos, os critérios do USPHS modificado e FDI foram utilizados para avaliar as restaurações. Os dados foram submetidos à análise estatística Mann-Whitney (p<0,05). Resultados: No acompanhamento de 3 anos, vinte e quatro restaurações (17 Classes I e 7 Classes II) foram avaliadas. Não foram detectadas diferenças entre as técnicas restauradoras (p>0,05). Não houve falha em nenhuma restauração ao longo do tempo. Conclusão: Após 03 anos de serviço clínico, todas restaurações utilizando um compósito bulk-fill flow em dentes posteriores demonstraram uma performance satisfatória. Significância Clínica: A qualidade geral das restaurações em dentes posteriores realizadas com a técnica bulk and body foi similar ao das restaurações incrementais utilizando um compósito nano-híbrido. (AU)

Objective: This randomized clinical trial evaluated the behavior of restorations with flowable bulk-fill resin composite in posterior teeth three years after the restorative treatment. Methods: Seventeen patients (12 women, 5 men, age 23-59) were selected to have at least two failing amalgam or resin restorations replaced and/or to have a carious lesion restored. The cavities were randomly allocated to receive either the flowable bulk-fill composite Surefil SDR Flow occlusally covered with the conventional nano-hybrid composite Esthet-X HD (bulk and body technique) or filled exclusively with Esthet-X HD placed in 2 mm increments (incremental technique). A two-step etch-and-rinse adhesive was applied in all cavities. Thirty-four Class I or II restorations were performed in posterior teeth (n=17) during baseline. After 03 years, modified USPHS and FDI criteria were used to evaluate the restorations. Data were subjected to Mann-Whitney statistical analysis (p<0.05). Results: At the 3-year follow-up, twenty-four restorations (17 Class I and 7 Class II) were evaluated. No diff erences were detected between the bulk and body and the incremental restorations (p>0.05). No restoration failures were observed over time. Conclusion: After 03 years of clinical service, all restorations using a flowable bulk-fill composite in posterior teeth showed an acceptable performance. Clinical Significance: The overall quality of posterior restorations made with the bulk and body technique was similar to that of restorations made with a nano-hybrid composite incrementally placed. (AU)

Effect of violet LED light on in-office bleaching protocols: a randomized controlled clinical trial

Abstract Objective This study evaluated the clinical effect of violet LED light on in-office bleaching used alone or combined with 37% carbamide peroxide (CP) or 35% hydrogen peroxide (HP). Methodology A total of 100 patients were divided into five groups (n=20): LED, LED/CP, CP, LED/HP and HP. Colorimetric evaluation was performed using a spectrophotometer (ΔE, ΔL, Δa, Δb) and a visual shade guide (ΔSGU). Calcium (Ca)/phosphorous (P) ratio was quantified in the enamel microbiopsies. Measurements were performed at baseline (T 0 ), after bleaching (T B ) and in the 14-day follow-up (T 14 ). At each bleaching session, a visual scale determined the absolute risk (AR) and intensity of tooth sensitivity (TS). Data were evaluated by one-way (ΔE, Δa, ΔL, Δb), two-way repeated measures ANOVA (Ca/P ratio), and Tukey post-hoc tests. ΔSGU and TS were evaluated by Kruskal-Wallis and Mann-Whitney, and AR by Chi-Squared tests (a=5%). Results LED produced the lowest ΔE (p<0.05), but LED/HP promoted greater ΔE, ΔSGU and Δb (T 14 ) than HP (p<0.05). No differences were observed in ΔE and ΔSGU for LED/CP and HP groups (p>0.05). ΔL and Δa were not influenced by LED activation. After bleaching, LED/CP exhibited greater Δb than CP (p>0.05), but no differences were found between these groups at T 14 (p>0.05). LED treatment promoted the lowest risk of TS (16%), while HP promoted the highest (94.4%) (p<0.05). No statistical differences of risk of TS were found for CP (44%), LED/CP (61%) and LED/HP (88%) groups (p>0.05). No differences were found in enamel Ca/P ratio among treatments, regardless of evaluation times. Conclusions Violet LED alone produced the lowest bleaching effect, but enhanced HP bleaching results. Patients treated with LED/CP reached the same efficacy of HP, with reduced risk and intensity of tooth sensitivity and none of the bleaching protocols adversely affected enamel mineral content.

Effects of experimental bleaching agents on the mineral content of sound and demineralized enamels

Abstract High concentrations of hydrogen peroxide can cause adverse effects on composition and structure of teeth. However, the addition of calcium and fluoride in bleaching agents may reduce enamel demineralization. Objective: To evaluate chemical changes of sound and demineralized enamels submitted to high concentrations of hydrogen peroxide containing fluoride (F) or calcium (Ca). Material and Methods: Enamel blocks of bovine incisors with standard dimensions were obtained and half of them were submitted to pH-cycling to promote initial enamel caries lesions. Sound and demineralized enamel samples were divided into (n=10): (C) Control (no whitening treatment); (HP) 35% hydrogen peroxide; and two experimental groups: (HPF) 35% HP+0.2% F and (HPC) 35% HP+0.2% Ca. Experimental groups were submitted to two in-office bleaching sessions and agents were applied 3 times for 15 min to each session. The control group was kept in remineralizing solution at 37°C during the bleaching treatment. The surface mineral content of sound and demineralized enamels was determined through Fourier Transform Raman spectroscopy (FT-Raman), Energy dispersive Micro X-ray fluorescence spectroscopy (μ-EDXRF); and the subsurface, through cross-sectional microhardness (CSMH). In addition, polarized light microscopy (PLM) images of enamel subsurface were observed. Results: According to three-way (FT-Raman and μ-EDXRF analyses) or two-way analysis of variance (ANOVA) (CSMH) and Tukey test (α=5%), the calcium or fluoride added to high-concentrated bleaching agents increased phosphate and carbonate concentrations on sound and demineralized enamels (p<0.05). However, HPC and HPF were unable to completely reverse the subsurface mineral loss promoted by bleaching on sound and demineralized enamels. The calcium/ phosphate (Ca/P) ratio of sound enamel decreased after HP treatment (p<0.001). Conclusion: Even though experimental bleaching agents with Ca or F reduced mineral loss for both sound and demineralized enamel surfaces, these agents were unable to reverse the enamel subsurface demineralization.